Working principle
Manually load rotor in the balancing unit, center the work-piece with an interface adapter and close the protective shroud
Start the automatic measuring run. Accelerate, measure and display the unbalance on the measuring unit, automatically index to the correction position. The measured value display is retained after each measuring run.
Open the protective shroud, unload and, if necessary, correct the unbalance.
Check the result of correction (achievement of tolerance is displayed by the measuring unit) and unload the rotor from the balancing unit.
Measuring units
CAB 700 is a compact basic instrument for all standard balancing tasks:
Simple, menu-driven operation, clear display and high accuracy allow perfect balancing of rotors by less experienced operators.
CAB 803 equipped with a high-contrast TFT display and touchscreen works with the Windows 2000® operating system and can provide an easy to read vector display of the unbalance.
Range of application
Measurement and correction of unbalance in disc-shaped rotors without their own shaft, in one or two planes. Typical examples of rotors are blank CDs, small blowers without self-propulsion, centrifuges, deflection pulleys, clutch components and rotating paint spray nozzles. A shorter spindle distance and protective shroud provide faster, safer and more accurate balancing. |
Design
- Force-measuring, vertical balancing machine with permanent calibration and automatic operation
- Designed for table-top placement, suitable for a seated operator
- Balancing unit, measuring unit and control cabinet are mounted on a common base plate.
- The dynamometer-mounted precision balancing spindle supports a removable adapter for centering the rotors and is driven by a flange-mounted electric motor. Adapters of the previous model CBAA may be further used.
- The protective enclosure designed according to ISO 7475 is part of the standard equipment.
|
