Range of application
Universal balancing machines type HM1 and HM10 are ideally suited to small work-pieces such as electric armatures, turbochargers and spindles. The machines are conceived for seated or standing operators and can be used at varying locations.
Change-over to new rotor types is straightforward and only requires a minimum of time. Three different drive systems are available: Overslung, underslung or tangential belt drive.
Unbalance correction can be achieved by addition of material (weights or balancing plasticine) directly on the machine or by removal of material on a separate machine tool.
Manual machining units are available as options.
Design
- Hard-bearing, horizontal balancing machine of table-top Design.
- Permanently calibrated measuring instrument, digital signal processing.
- CAB 700 measuring instrument with graphics-capable color LCD display.
- Optional: CAB 920 with Windows operating system, TFT color screen and display of unbalance in vector form.
- Complete workplace essentially of the following components: Machine table, mechanical balancing unit with roller or prism bearings and belt drive.
|
Special features
- The machine can be mounted directly on the workshop floor without foundations and without bolting, and is immediately ready for use.
- Hard-bearing principle ensures quick change-over
- High balancing accuracy
- Optimum operating height
- Infinitely variable DC drive
- Automatic measuring cycle with settable acceleration, measuring and braking time.
- Can be extended with integral mass correction system
|
